Contact us：Amy Peng
Mobile: 0086 13662834186
Phone：0086 769-87190386
Fax ：0086 769-87190386
Q Q：249911599
Material Notes: Key Features: •Unfilled Suitable processing methods: •Injection molding Information provided by Bayer Polymers.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.22 g/cc | 0.0441 lb/in³ | |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Yield | 12.0 MPa | 1740 psi | Stress at 50% Strain |
| Elongation at Break | >= 50 % | >= 50 % | |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 2.30e+12 ohm-cm | 2.30e+12 ohm-cm | |
| Surface Resistance | 3.00e+12 ohm | 3.00e+12 ohm | |
Dielectric Constant  |
4.5 @Frequency 1e+6 Hz |
4.5 @Frequency 1e+6 Hz |
|
| 5.5 @Frequency 100 Hz |
5.5 @Frequency 100 Hz |
||
| Dielectric Strength | 19.7 kV/mm | 500 kV/in | |
| Dissipation Factor |
0.027 @Frequency 100 Hz |
0.027 @Frequency 100 Hz |
|
| 0.069 @Frequency 1e+6 Hz |
0.069 @Frequency 1e+6 Hz |
||
| Comparative Tracking Index | 600 V | 600 V | |
| Thermal Properties | Metric | English | Comments |
| CTE, linear, Parallel to Flow | 163 µm/m-°C @Temperature 20.0 °C |
90.6 µin/in-°F @Temperature 68.0 °F |
|
| Vicat Softening Point | 145 °C | 293 °F | 50°C/h 50N |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 210 °C | 410 °F | Injection Molding |
| Mold Temperature | 30.0 °C | 86.0 °F | Injection Molding |
| Injection Pressure | 50.0 MPa | 7250 psi | |
